L-16TC-SDI-FE-RX
1-16 Traffic Cards HD-SDI over Fiber Receiver with IP and RS485
QuestTel's centralized HD-SDI Optical Fiber Receiver Chassis System provides up to 16 plug-in cards and 1 management card with CLI and SNMP V1/V2 support to perform perfect management functions. The L-16TC-SDI-FE-RX is 19 inch rack mounting chassis, with 3 fans and dual power supplies to support power redundant protection.

Request Best Price:
- 19 inch and 4U height
- 16 traffic card slots and 1 management card slot
- 3 fans embedded
- Dual power supplies for power redundant protection
- Provides one RS232 management interface(CONSOLE) for CLI management
- Provides 1 Ethernet management interface(EMU) and one cascade management interface (EMU-EX), supports SNMP V1&V2 protocols
Video Interface | |
Connector | BNC |
Fiber Connector | ST/PC |
Bit rate | 1.485Gb/s and 270Mb/s auto adaptive |
Impedance | 75Ω |
Return loss | >15dB |
Rise and fall time HD-SDI | ≤270ps |
Rise and fall time SD-SDI | ≤1.50ns |
SD-SDI Alignment jitter (1KHz) | ≤0.2UI |
SD-SDI Timing jitter (10Hz) | <0.2UI |
HD-SDI Alignment jitter (100KHz) | ≤0.2UI |
HD-SDI Timing jitter (10Hz) | <1.0UI |
Standard | Comply to SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard |
RS485 Interface | |
Connector | PHOENIX connector |
Baud rate | 0~115.2Kb/s |
Bit error ratio | <10-9 |
Duplex | Half-duplex |
CONSOLE Interface | |
Connector | RJ45 |
Baud rate | 19200 |
bits | 8 |
Stop bit | 1 |
parity check | None |
EMU/EMU-EX Interface | |
Connector | RJ45 |
Bit rate | 10Mb/s or 100Mb/s auto adaptive |
Environment Requirements | |
Working temperature | -30~60°C |
Relative Humidity | ≤95%, no condensation |
Storage temperature | -40~85°C |
Equipment dimension | 330mm × 178mm × 482mm |
Pdf User Manual: L-16TC-SDI-FE-RX
Disclaimer: Products, specifications and data are subject to change without notice, to improve reliability, function, design or otherwise.
QuestTel shall have no liability for any error or damage of any kind resulting from the use of this document.
